How to Clean a Shark Vacuum and Its Filter for Optimal Performance
Importance of Regular Cleaning
Shark vacuums are renowned for their exceptional performance, largely attributed to their multiple filters that effectively capture dust and debris. Maintaining these filters is crucial to ensure optimal suction power and cleaning efficiency.
How Often to Clean
The frequency of cleaning your Shark vacuum depends on the model and usage patterns. As a general guideline:
- Empty the dust cup or bin after every use or when it is half-full.
- Check rollers and hoses monthly for tangles or clogs.
- Clean the pre-motor filters every three months.
- Clean the post-motor filter once per year.
Step-by-Step Cleaning Instructions
1. Safety First
Unplug the vacuum or remove it from the charging station before cleaning.
2. Inspect and Clean the Roller Brush
Remove any tangled hair or debris from the roller brush using small scissors or a seam ripper. Ensure the brush turns freely.
3. Clean the Dust Collection Cup or Bin
Empty the dust collection container into a trash can. Rinse it with warm water and wipe it down with a microfiber cloth. Allow it to air dry.
4. Check the Hose
Disconnect the hose and check for any blockages or damage. Remove any debris with a yardstick or garden hose. Wipe down the hose with a damp microfiber cloth and reconnect it properly.
5. Clean the Filters
Foam and/or Felt Filters: Rinse with cold water without using any soap. Gently squeeze to remove excess water. Roll in a microfiber towel to further dry.
Pleated Filters: Brush away any debris with a soft-bristled nylon brush. Hold the filter under running cold water until the water runs clear. Let it air dry for at least 24 hours.
6. Wipe Down the Housing
Use a lightly damp microfiber cloth to wipe down the exterior of the vacuum, paying attention to air vents near the motor. Avoid getting water inside the components.
7. Inspect the Electrical Cord
Check the electrical cord for any damage. If you notice any cracks or exposed wires, it’s time for a repair.
Tips for Keeping Your Shark Vacuum Clean Longer
- Empty the dust cup or canister frequently.
- Check the filters monthly if your home is excessively dusty.
- Wipe away dust from the vent covers after every use.
- Replace filters regularly as per the manufacturer’s recommendations.
- Keep a spare set of filters for quick replacement while the others are drying.
Additional Tips
- Refer to your Shark vacuum’s user manual for specific cleaning and maintenance guidelines.
- If you have lost or discarded the manual, you can find it on the Shark website by entering your vacuum’s model number.
- Shark offers a lifetime guarantee on its filters, but replacement filters are available for purchase.
- Regular cleaning and maintenance will extend the life of your Shark vacuum and ensure its optimal performance.
